 |
|
Talon HV/HVX Field Pour Series
The
Talon Highway Vehicle (HV) and Highway Vehicle
Extreme (HVX) Truck Scales boast the longest-lasting
construction of any field pour scales in the
industry. With features that far exceed the
competition, these scales are a great solution to
satisfy your weighing needs.
Brochure
/
Brochure
|
|
|
|
|
 |
|
Talon HV/HVX Steel Deck Series
The
Talon Highway Vehicle (HV) and Highway Vehicle
Extreme (HVX) Truck Scales boast the longest-lasting
construction of any steel deck scales in the
industry. With features that far exceed the
competition, these scales are indisputably a great
addition to any weighing system.
Brochure /
Brochure |
|
|
|
|
 |
|
Matrix Series Configurable Truck
Weighing System
Fairbanks Matrix truck weighing system challenges
conventional truck scale design with its
revolutionary modular approach to obtaining legal-for-trade
vehicle weights in low-volume weighing applications
The configurable truck weighing system reduces cost
by utilizing steel scale platforms under each set of
truck scale axles and concrete modules (dead spans)
between scale platforms. The ultra-low-profile
Matrix is designed for installation on a level,
unyielding surface, thereby eliminating other cost
associated with building a foundation or pit.
Brochure /
Brochure /
Brochure /
Picture gallery |
|
|
|
|
 |
|
Tundra Fully
Electronic Pit-type Truck Scale
Fairbanks new Tundra XL and XLT Pit-type Truck
Scales feature the Fairbanks dual main girder
weighbridge design, which has been the industry
standard for strength and durability for nearly 100
years. The Tundra is designed to significantly
reduce the amount of real estate typically required
for scale operations. Where installation space is
tight, or real estate rates are premium, the Tundra
is an exceptional cost-saving and space-saving
choice.
Brochure /
Brochure |
| |
|
|
|
|
 |
|
Titan Steel Deck Above Ground Truck
Scale
Designed to the highest standards in the industry,
Fairbanks’ Titan Steel Deck Truck Scale outperforms
all contenders across the board, making it the new
heavyweight champion in its class. In head-to-head
comparisons, the Titan ranks number one in Gross
Weight Capacity, Load Cell Capacity, Deck Plate
Thickness, I-beam Construction, CLC Rating and sheer
Steel Weight.
The Titan Steel Deck Truck Scale is constructed from
multiple 12” and 16” Structural Steel I-beams. These
massive supports, coupled with the thickest standard
deck plate on the market, produce an extremely rigid
weigh bridge that easily handles the demands of
America’s toughest truck scale applications. Extreme
or redundant loads won’t cause dimpling or rolling
damage found on other so-called, heavy-duty truck
scales.
Brochure /
Brochure
|
|
|
|
|
 |
|
Talon HV Series Portable Vehicle
Scale
Talon HV Portable Vehicle scales are constructed
with multiple 10" and 12" Structural Steel I-beams.
This durable weighbridge is the perfect solution for
weighing operations that must get into action
immediately, or where situations warrant a movable
truck scale. Designed to the highest standards in
the industry, Fairbanks' Talon HV Portable Vehicle
Scale outperforms all contenders across the Board.
Brochure /
Brochure /
Brochure |
|
|
|
|
 |
|
Titan Series Portable Vehicle Scale
Available in sizes specifically for mobile
operations, the Titan Series Portable Vehicle Scales
are made for easy assembly and removal. Constructed
with multiple 12” and 16” Structural Steel I-beams.
These massive supports, coupled with the thickest
standard deck plate on the market (3/8”), produce an
extremely rigid and durable weigh bridge.
Picture
Gallery
/ Brochure
/ Brochure |
|
|
|
|
 |
|
'PV on the Spot' Program - Titan &
Talon Series Truck Scales
When a truck scale needs to be
replaced, why waste money renting a temporary scale
or lose valuable weighing time during installation?
Thanks to Fairbanks' new 'PV on the Spot' Program,
our customers don't have to.
We will set up your Titan or Talon Series Portable
Vehicle (PV) Scale in a temporary location while a
foundation is constructed or modified to house the
scale permanently.
Brochure |
|
|
|
|
 |
|
Rodan® Megabar
Heavy Duty 60K DTAC or 80K DTAC
Heavy duty, fully electronic scales designed for
above ground or pit-type use. Each Megabar features
a factory poured and cured concrete deck made from
Fairbanks' patented Megabar concrete formula — the
strongest deck building material on today's
market.The Megabar is the perfect solution for
applications that demand up to 300 standard truck
weighments a day at 60K DTAC/CLC or 80K DTAC/CLC.
Fairbanks' exclusive Intalogix® Technology is a
standard feature of the Megabar. Custom lengths are
available. Read
More
Brochure /
Brochure /
Brochure |
|
|
|
|
 |
|
Rodan® Megabar
Side-By-Side Off-Road Vehicle Scales
Fairbanks now offers an NTEP approved, heavy duty,
off-road vehicle scale for those extra wide or extra
heavy weighing applications. The side-by-side
Megabar scale can be sized to fit nearly all
off-road vehicle weighing applications. With a
400,000 pound capacity, this mega-scale can weigh
almost any off-road vehicle, including a Euclid R40,
Caterpillar 773 and TEREX 3308. Read
More
|
|
|
|
|
 |
|
Portable Axle Load Scales
Fairbanks' Portable Axle Load Scale is constructed
in a subframe that totally eliminates the need for a
pier or slab foundation. A flat, unyielding surface
such as asphalt or concrete is all that ’s required
to install the complete unit. By eliminating the
foundation,both installation and relocation of this
scale are a snap,requiring minimal time,effort and
money. If change in process, traffic flow, or
location occurs, the Fairbanks Portable Axle Load
Scale offers the ultimate in weighing flexibility.
Brochure |
|
|
|
|
 |
|
Combination
Truck Railroad Track Scales
The
Reinforced concrete deck has been designed for both
railcar and truck loading. The recessed rails
support the railcar traffic while the reinforced
concrete deck allows for accurate weighing of
trucks.
Brochure /
Brochure |
|
|
|
|
 |
|
Slow Speed Weigh in Motion System
Fairbanks®-IRD’s Slow Speed Weigh-In-Motion (SSWIM)
System is a high accuracy, low speed weighing
approach ideally suited for commercial fleet axle
weight monitoring and axle compliance. At the core
of the system is the Model 4020 Slow Speed WIM Scale.
Brochure |
|
|
|
|
 |
|
Single Load Cell Premium High
Performance WIM Scale
The
SLC Scale can be used at all speeds — from slow
speeds to highway speeds. Its low maintenance, long
service life and unequalled accuracy make it the top
choice for long-term weighing. Its reputation for
reliability and performance is a result of more than
20 years of operational history with medium and high-speed
weighing and data collection.
Brochure |
|
|
|
|
 |
|
Bending Plate
The
Bending Plate Scale contains load-weighing elements
installed within a robust CNS machined steel pad.
Six load-measuring transducers mounted within the
steel pad are designed to allow the scale to be
linearized across the entire weighing width. Each
scale is mounted flush with the road surface with a
depth of no more than 4 inches (100 mm). The Bending
Plate Scale is completely waterproof and produces
accurate measurements in all weather conditions.
Brochure |
|
|
|
|
 |
|
Intalogix"
Conversion Kit For Mettler-Toledo DigiTOL® Platforms
Convert your Mettler-Toledo DigiTOL" truck scale to
a state-of-the-art digital system featuring enhanced
diagnostics and unmatched surge voltage protection.
It's easy with Fairbanks' Intologix Technology Truck
Scale Conversion Kit. This kit contains absolutely
everything you'll need to complete your conversion
and bring your DigiTOL scale into the 21st century.
Brochure |
|
|
|
|
 |
|
Highway System
Configuration
Fairbanks' Highway System Configuration for the 2500
Flash Series instruments can be used to display
individual platform weights of two, three or four
truck scales, as well as the total sum of all
platforms simultaneously.
Brochure /
Brochure |
|
|
|
|
 |
|
Canadian Scale EP/HP
Series
Designed for
portability, EP/HP Series Portable Truck
Scales are designed for heavy-duty weighing
in locations where a permanent Truck Scale
is not required. Versatile and cost-effective,
the EP/HP's self-contained modules make it a
snap build a configuration that fits your
application requirements. You can add side
rails, in any height and length
configuration, to ensure that trucks are
able to move on and off your scale safely.
The EP/HP features side and top access to
load cells which greatly simplifies
installation and routine maintenance. The EP/HP
also incorporates a lock-down system that is
used to prevent damage to load cells and
mounting assemblies while the scale is being
transported. Standard steel end
walls are designed to allow high-compression
backfilling of approach ramps.
|
|
|
|
|
 |
|
Canadian Scale
EFDI/HFDI Truck Scales
are the heavy
weights in the Low Profile class of Truck Scales.
Built with more steel than most other Low
Profile Truck Scales currently available, our
scale sets itself apart as the Truck
Scale for the toughest truck weighing
applications on earth.
Available in 14″
and 18″ profiles, EFDI/HFDI Truck Scales are
engineered to deliver exceptional performance.
EFDI/HFDI Truck Scales are available in both
steel deck and concrete deck configurations.
Under legal highway loads, the EFDI/HFDI
weighbridge deflects less than 1:850. In
addition, it stands at an overall height of 20″,
providing a large and easily accessible clean
out. With an up to 14′ wide loading area it
delivers greater safety and faster processing,
allowing your operation to run at full potential.
|
|
|
|
|
 |
|
Truck Scales for
Off Road and Off Highway Trucks
Our EP/HP HDT
Series Truck Scale are designed for weighing
what are known as Off Road or Off Highway
Trucks. They are built to provide reliable
weighing in extreme heavy-duty applications
such as mining, logging, aggregate
production, steel, and road construction.
The scale pictured to the left is hard at
work weighing Caterpillar® 773D
Off Highway Trucks in the breath taking
wilderness of Labrador, Canada. Our
Off Road Truck Scales are suitable for
weighing trucks manufactured by Caterpillar®,
Komatsu®, Terex® and
Hitachi (Euclid).
|
|
|
|
|
 |
|
Emery Winslow
The Hydrostatic Load
Cell is a simple mechanical mechanism which
functions according to known hydrostatic Laws of
Physics. It consists of a piston, a base, a
cylinder and a diaphragm. A thin film of fluid
is sandwiched between the base and the diaphragm.
The piston presses against the diaphragm.
The result is only a
small amount of fluid is required (e.g. less
than one pint of fluid used in a 80 foot truck
scale). Each Hydrostatic Load Cell type is
designed with an exact "acting area" - a known
value in units of square inches. For example,
when a known weight is applied to a hydrostatic
load cell with a known "acting area", the output
in PSI is predictable.
A 50,000 lb.
weight applied to an "acting area" of 50 square
inches will have an output of 1,000 PSI.
The secret, of
course, is to design the hydrostatic load cell
with a linear relationship between weight
applied and pressure output. For example, if
50,000 lbs. yields 1,000 PSI, then 25,000 lbs.
must yield 500 PSI and 100,000 must yield 2,000
PSI.
Brochure |
